Patch Name:  PHNE_4299

Patch Description: s700 9.X SNAplus R2 QLLC patch

        This patch fixes a problem caused by SNAPRJE patch PHNE_3684, where
        RJE console commands resets the QLLC connection.

        PHNE_3355:
        ---------
        This patch fixes the following QLLC problems,

        1. System Panic in QLLC - SR# 1653072652
        2. Malloc failure causing permanent registration of X.121 address -
           SR# 1653074302
        3. Not able to use 15 digit X.121 addresses
        4. Not processing correctly incoming calls into HP system using
           Format 0

Path Name:  /hp-ux_patches/s700/9.X/PHNE_4299

Effective Date:  940524

Repost: 95/07/21
        The patch was modified to allow installation on HP-UX 9.07.

OS Release:  9.00 9.01 9.03 9.05 9.07

Reboot Required:  Yes

Patch Files:  
    libsixq.a

SR#:  1653090324

"what" string/timestamp:  
    libsixq.a:
         A.09.01.004 SNAplus QLLC Driver

"sum" output:  
    17607 336 libsixq.a

Dependencies:  None

Supersedes:  PHNE_3355

Patch Package Size:  220 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHNE_4299).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHNE_4299.updt"
   (this assumes that you are in the /tmp directory where PHNE_4299.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHNE_4299/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHNE_4299.text file to /system/PHNE_4299 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHNE_4299.updt of=/dev/rmt/0m bs=2048