Patch Name:  PHNE_4243

Patch Description: s700 9.X OTS/9000 Megapatch C.04.01

        OTS C.04.01 RFC1006 cannot interoperate with some implementations.
        When a non-HP remote tries to establish a connection, the HP RFC1006
        sends a CC TPDU which has 3 extra bytes of 0s. RFC1006 is supposed to
        remove the 3 extra bytes before sending the CC. This causes the remote
        to reject the connection.

        User data greater than 64K bytes cannot be transferred
        when using session API or APRI over RFC1006.

        Logging and tracing for RFC1006 can be done by turning on
        logging and tracing for transport entity.

        PHNE_3833:
        ---------
        Enhanced range of configuration for Transport/Session timers.

        tpcons_tp4_retrans_timer has no effect. Always retrans at
        10 sec. when network connection fails.

        Use of Q bit in a CR TPDU hangs HP-UX.

        Session interoperability problems with BULL.

        OTS panics on receipt of P-Connect containing no PCDL list.

        ACSE doesn't send an ABRT APDU when an invalid PDU is received
        in sta7.

        Spurious log msg "OsiDwBind() invalid NSAP length INT( *Nsap)=0".

        Trace/Log messages are dropped unnecessarily.


Path Name:  /hp-ux_patches/s700/9.X/PHNE_4243

Effective Date:  940513

Modification Date:  940616

Modification Reason:  The PHNE_4243.text file was modified to add additional
                      fix information and to remove special installation
                      instructions that were not required.

OS Release:  9.00 9.01 9.03 9.05

Reboot Required:  Yes

Patch Files:  
    acssub.o
    genemsg.o
    rk6emsg.o
    sescod.o
    sesemsg.o
    strosxconf.o
    strosxcstz.o
    strosxopi.o
    strosxos.o
    strosxrK6.o
    trsmai2.o

SR#:  4701253260

"what" string/timestamp:  
    acssub.o:
         acssub.c $Revision:  1.3.109.4.1.1 $ $Date:  94/03/25 11:22:31
         $
    genemsg.o:
    rk6emsg.o:
    sescod.o:
         sescod.c $Revision:  1.1.109.3 $ $Date:  94/02/27 17:42:01 $
    sesemsg.o:
         sesemsg.c $Revision:  1.2.109.5 $ $Date:  94/03/25 11:20:26 $
    strosxconf.o:
         strosxconf.c $Revision:  1.3.109.12 $ $Date:  94/03/24 15:31:52
         $
    strosxcstz.o:
         FILESET OTS-KRN:  lib otsam:  Revision:  C.04.01 Patch Level:
         PHNE_3832(800s)/PHNE_3833(700s),
         PHNE_4242(800s)/PHNE_4243(700s)
    strosxopi.o:
         strosxopi.c $Revision:  1.2.109.5 $ $Date:  94/02/24 10:19:54 $
    strosxos.o:
         strosxos.c $Revision:  1.3.109.15 $ $Date:  94/01/24 13:05:38 $
    strosxrK6.o:
         strosxrK6.c $Revision:  1.1.109.24 $ $Date:  94/05/12 08:58:01
         $
    trsmai2.o:
         trsmai2.c $Revision:  1.3.109.8 $ $Date:  94/03/24 16:06:01 $

"sum" output:  
    23649 48 acssub.o
    41463 22 genemsg.o
    2482 14 rk6emsg.o
    56754 26 sescod.o
    19744 19 sesemsg.o
    40156 84 strosxconf.o
    10441 4 strosxcstz.o
    19755 99 strosxopi.o
    13012 29 strosxos.o
    61862 103 strosxrK6.o
    1432 45 trsmai2.o

Dependencies:  PHNE_3834 PHNE_4244

Supersedes:  PHNE_3833

Patch Package Size:  318 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHNE_4243).

============================================================================

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHNE_4243.updt"
   (this assumes that you are in the /tmp directory where PHNE_4243.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHNE_4243/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHNE_4243.text file to /system/PHNE_4243 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHNE_4243.updt of=/dev/rmt/0m bs=2048