Patch Name:  PHNE_4003

Patch Description: s700 9.X FDDI NETSTAT programmatic access with RD_ONLY

        This patch will allow programmatic access to the NETSTAT ioctl
        for the 700 series FDDI driver for programs that open the
        device file with READ ONLY access. Previously the program would
        need to open the file with READ and WRITE access. This makes
        the FDDI driver behave as the other lan drivers do.

Path Name:  /hp-ux_patches/s700/9.X/PHNE_4003

Effective Date:  940325

OS Release:  9.00 9.01 9.03 9.05

Reboot Required:  Yes

Patch Files:  
    fddi_dnld
    lanc_fddi.o

SR#:  5003185538 5003185504

"what" string/timestamp:  
    fddi_dnld:
         EISA FDDI download code 930921-13:40 ver 48
    lanc_fddi.o:
         FILESET FDDI:  lib libfddi:  Version:  A.09.00 lanc_fddi.c
         $Revision:  1.10 $ $Date:  94/03/18 11:15:38 $

"sum" output:  
    3259 682 fddi_dnld
    34540 43 lanc_fddi.o

Dependencies:  None

Supersedes:  PHNE_2636 PHNE_3207

Patch Package Size:  431 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHNE_4003).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHNE_4003.updt"
   (this assumes that you are in the /tmp directory where PHNE_4003.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHNE_4003/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHNE_4003.text file to /system/PHNE_4003 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHNE_4003.updt of=/dev/rmt/0m bs=2048