Patch Name:  PHNE_2943

Patch Description: s700 9.X New command to set MTU size on FDDI.

        Customers have requested a command to set the MTU size of
        FDDI adapters from a large packet size (4352 bytes) to
        a smaller size (1500 bytes). This will prevent fragmentation
        of packets from a FDDI subnet to a Ethernet subnet.

Path Name:  /hp-ux_patches/s700/9.X/PHNE_2943

Effective Date:  930728

Modification Date:  94/07/28

Modification Reason:  The patch was modified to allow installation on
                      HP-UX 9.03 and 9.05.

Patch Files:  
    fddimtu7

SR#:  5003131672

"what" string/timestamp:  
    fddimtu7:
        FDDIMTU7:  $Revision:  1.0 $Date:  93/07/27 14:41:55 $

"sum" output:  
    2599 40 fddimtu7

Dependencies:  None

Supersedes:  None

Patch Package Size:  52 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHNE_2943).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHNE_2943.updt"
   (this assumes that you are in the /tmp directory where PHNE_2943.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHNE_2943/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHNE_2943.text file to /system/PHNE_2943 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHNE_2943.updt of=/dev/rmt/0m bs=2048