Patch Name:  PHKL_1199

Patch Description: fixes panic caused by drivers using lbcopy/uiomove

    system panics if a third-party supplied driver uses lbcopy()
    and/or uiomove() to copy data to I/O space.  You only need this
    patch if you:
       a) Are including a third-party (non-HP) supplied driver
          in your kernel.
       b) The kernel panics when the third-party driver is used.

Path Name:  /hp-ux_patches/s700/9.X/PHKL_1199

Effective Date:  930129

Patch Files:  
/etc/conf/libhp-ux.a (asm_utl.o)
/etc/conf/libhp-ux.a (lbcopy.o)

SR/APR#:  1653-041822

"what" string/timestamp:  
asm_utl.o: PATCH_9.01:  asm_utl.o  1.109.61.13 93/01/26 PHKL_1199
lbcopy.o: PATCH_9.01:  lbcopy.o  1.2.61.6 93/01/26 PHKL_1199

"sum" output:  
14058 41 asm_utl.o
24163 10 lbcopy.o

Dependencies:  None.

Supersedes: None.

Patch Package Size:  52 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHKL_1199).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHKL_1199.updt"
   (this assumes that you are in the /tmp directory where PHKL_1199.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
/system/PHKL_1199/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended
that you move the PHKL_1199.text file to /system/PHKL_1199 to be retained
for future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:

    dd if=PHKL_1199.updt of=/dev/rmt/0m bs=2048