Patch Name:  PHSS_2079

Patch Description: HP 700/RX X Station B.03.01 Server patch level 5

        This patch fixes the following 700/RX B.03.01 server defects:

        1) link level address now returned correctly in SNMP read
           request. (used to be returned as 0).

        2) UDP 'packets in' and 'packets out' and 'no ports' data now
           reported correctly by SNMP.

        3) HP extensions modified to cope better with Starbase
           requirements.

        4) Crash with Pro-Engineer application
           problem zero height ellipses.

        5) Terminal hangs if change mode of serial port
           SLIP <-> primary more than once.

        6) 'terminal reset' via SNMP added.
           (to enable this feature see /usr/lib/X11/700X/etc/sample.snmpdrc)

        7) Terminal constantly resets after logging out of Vue if
           Softbench 3.0 is installed.
           (/usr/softbench/xmserve is present)


Path Name:  /hp-ux_patches/s700/8.X/PHSS_2079

Effective Date:  930210

Patch Files:  
        /system/PHSS_2079/new/C2700A
        /system/PHSS_2079/new/C2708A
        /system/PHSS_2079/new/hp700rx.mib
        /system/PHSS_2079/new/snmpdrc.template

SR/APR#:  None.

"what" string/timestamp:  
 C2700A:
 HP 700/RX (C2700A) Server Code, Release B.03.01P5
 C2708A:
 HP 700/RX (C2708A, C2707A, C2703A, C2700A) Server Code, Release B.03.01P5
 hp700rx.mib:
 sample.snmpdrc:

"sum" output:  
 56239 2629 C2700A
 38553 3039 C2708A
 40965 81 hp700rx.mib
 61104 3 sample.snmpdrc

Dependencies:  This patch should only be applied to the HP 700/RX B.03.01
                server.

Supersedes: PHSS_0694.

Patch Package Size:  2980 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHSS_2079).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHSS_2079.updt"
   (this assumes that you are in the /tmp directory where PHSS_2079.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHSS_2079/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHSS_2079.text file to /system/PHSS_2079 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHSS_2079.updt of=/dev/rmt/0m bs=2048