Patch Name:  PHSS_1590

Patch Description: Not reporting Raw IO & diskless startup failure

        SR D500-140913
                Logical I/O is reported incorrectly if Oracle is started
                prior to starting midaemon and GlancePlus/UX.  A possible
                indicator of this problem is that physical I/O will be
                greater than logical I/O as shown in the Disk Detail screen.
                It will also show a high cache hit rate.  Refer to Teck call
                ID W1745878.  This raw IO is not reported.

        SR D500-140962
                The A.08.11 mi_lib has a problem which causes
                glance and scopeux to fail during initialization on diskless
                clients which do NOT have either a locally-mounted filesystem
                or local swap.  The error seen in the glance.err or
                status.scope file is:
                get_hfs_init: no HFS vfs entry found
                This problem has been corrected.


Path Name:  /hp-ux_patches/s700/8.X/PHSS_1590

Effective Date:  921006

Patch Files:  
        glance
        midaemon
         800 HPUX/MI-A HPPerf Tools,midaemon    A.08.15 10/05/92
         COPYRIGHT (c) Hewlett-Packard Co. 1991
         800 HPUX/MI-A HPPerf Tools,dsetup      A.08.00 5/16/91
         800 HPUX/MI-A HPPerf Tools,shared      A.08.01 09/11/91


SR#:    D500-140913, D500-140962

"what" string/timestamp:  
    glance:
    midaemon:

"sum" output:  
    45910 792 glance
    20848 240 midaemon

Dependencies:  None.

Supersedes: None.

Patch Package Size:  564 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHSS_1590).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHSS_1590.updt"
   (this assumes that you are in the /tmp directory where PHSS_1590.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHSS_1590/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHSS_1590.text file to /system/PHSS_1590 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHSS_1590.updt of=/dev/rmt/0m bs=2048