Patch Name:  PHNE_1703

Patch Description: Fixes 4701-165407 -- ftp hanging for certain size files.
                   Other services may also hang/fail.
                   Fixes 4701-165158816 -- lcnode from DN nodes failing when
                   ATR interface is ifconfig'd down on 700 node.
                   The S700 will not propagate lcnode and bldt commands
                   if the ATR interface is ifconfig'd down.
                   Fixes boottime token holding problem.
                   Fixes problem of atrread parity error messages being
                   displayed to the console.

Path Name:  /hp-ux_patches/s700/8.X/PHNE_1703

Effective Date:  921117

Patch Files:  PHNE_1703.text PHNE_1703.updt

SR#: 4701-165407, 4701-158816.

"what" string/timestamp:  

atr.o:
         FILESET ATR: lib atr: Version: A.08.07 DART6 PHNE_1703

"sum" output:  43551 44 atr.o

Dependencies:  Assumes that ATR DART6 release is already installed.

Supersedes: None.

Patch Package Size:  52 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHNE_1703).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHNE_1703.updt"
   (this assumes that you are in the /tmp directory where PHNE_1703.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHNE_1703/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHNE_1703.text file to /system/PHNE_1703 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHNE_1703.updt of=/dev/rmt/0m bs=2048