Patch Name:  PHKL_1152

Patch Description:  use of unnamed pipes increases disk quota numbers

    The use of unnamed pipes caused the inode count for quotas to
    increase but never decrease.  The user will finally hit his/her
    limit on inoes on the root file system.  The only way to reset
    the count is to run /etc/quotacheck.

Path Name:  /hp-ux_patches/s700/8.X/PHKL_1152

Effective Date:  920608

Patch Files:  
/etc/conf/libufs.a (ufs_fifo.o)

SR/APR#:  1653020008

"what" string/timestamp:  
ufs_fifo.o: PATCH_8.05 ufs_fifo.c 1.17.43.5 92/06/08 PHKL_1152

"sum" output:  
56675 18 ufs_fifo.o

Dependencies:  None.

Supersedes: None.

Patch Package Size:  41 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHKL_1152).

To install this patch do the following:
1) Run the update program (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHKL_1152.updt"
   (this assumes that you are in the /tmp directory where PHKL_1152.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
/system/PHKL_1152/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended
that you move the PHKL_1152.text file to /system/PHKL_1152 to be retained
for future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:

    dd if=PHKL_1152.updt of=/dev/rmt/0m bs=2048