Patch Name: PHKL_0889

Patch Description: fixes panic "check_acl_X  i_contin set, i_contip not"

   The system panics with the above message when access control lists
   are being used.  See acl(5).  This patch fixes the problem.

   The file fixed was ufs/ufs_inode.c

   The corresponding patch for HP-UX 8.0 on the 300 and 400 series is
   PHKL_0728.

Path Name: /hp-ux_patches/s700/8.X/PHKL_0889

Effective Date: 920304

Patch Files: /system/PHKL_0889/new/conf/ufs_inode.o

SR/APR#: 1653009654

"what" string/timestamp:
protocol.o:
	 PATCH_8.07 ufs_inode.c 1.34.61.6 92/03/04 PHKL_0889

"sum" output:
22258 35 ufs_inode.o

Dependencies:  None.

Supersedes: None.

Patch Package Size: 37 Kbytes

Installation Instructions: 

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHKL_0889).

To install this patch do the following:
1) Run the update program (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHKL_0889.updt" 
   (this assumes that you are in the /tmp directory where PHKL_0889.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software 
to /system/PHKL_0889/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHKL_0889.text file to /system/PHKL_0889 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHKL_0889.updt of=/dev/rmt/0m bs=2048