Patch Name:  PHSS_2934

Patch Description: s700 8-9.X Add DeskJet 550C support for screenpr(1)

      Additional printer support for screenpr, listed in the usage error
      message for screenpr.  Addition of DJ550C support for screenpr.

            Usage example:

            screenpr -C -j -r300 > sb.screen.bmf

Path Name:  /hp-ux_patches/s700/8-9.X/PHSS_2934

Effective Date:  93/07/29

Patch Files:  
/usr/bin/screenpr

SR/APR#:  5003127944

"what" string/timestamp:  

NOTE OUTPUT WAS CUT BY SEVERAL LINES:

screenpr:
         STARBASE HP-UX 8.07 A.08.07 10/09/91  screenpr PHSS_2934 $Revision:
402.1.1.4 $

"sum" output:  
25261 4248 screenpr

Dependencies:  None.

Supersedes: PHSS_1388

Patch Package Size:  2233 Kbytes

Installation Instructions:  
Please review all instructions ans the Hewlett-Packard
SupportLine User Guide or Hewlett-Packard support terms
and conditions for precautions, scope of license,
restrictions, and, limitations of liability and warranties,
before installing this patch.

Note: Please back up your system before you patch.

---------------------------------------------------------------------------

After getting the patch onto your machine, unshar the patch (sh PHSS_2934).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source: /dev/rmt/0m" to "Source: /tmp/PHSS_2934.updt"
   (this assumes that you are in the /tmp directory where PHSS_2934.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow standard directions for update.

The customize script that update runs will move the original software to
/system/PHSS_2934/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHSS_2934.text file to /system/PHSS_2934/ to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example, the
following will create a copy of the patch the update can read:
dd if=PHSS_2934.updt of=/dev/rmt/0m bs=2048