Patch Name:  PHNE_5287

Patch Description: s300_400 9.X increase rcp receive buffer to 32K

Creation Date: 95/02/27

Post Date:  95/03/07

Repost: 95/06/21
        The patch was modified to allow installation on HP-UX 9.10.

Hardware Platforms - OS Releases:
        s300_400: 9.00 9.03 9.10

Products: N/A

Filesets:
        ARPA-RUN

Automatic Reboot?: No

Status: Special Release

Critical: No

Path Name:  /hp-ux_patches/s300_400/9.X/PHNE_5287

Symptoms:
        PHNE_5287:
        Improves performance of rcp on large files.

Defect Description:
        PHNE_5287:
        Receive buffer size of 8K limited transfer rate.

SR:
        5003249680

Patch Files:  
        /usr/bin/rcp

what(1) Output:
        /usr/bin/rcp:
                Copyright (c) 1983 The Regents of the University of
                        California.
                rcp.c   5.20 (Berkeley) 5/23/89
                $Header: rcp.c,v 1.13.109.5 95/02/22 15:50:52 randyc
                         Exp $
                PATCH_9.X: rcp.c $Revision: 1.13.109.5 $ 95/02/27 PH
                        NE_5287

sum(1) Output:
        39444 33 /usr/bin/rcp

Patch Conflicts: None

Patch Dependencies:  None

Hardware Dependencies:  None

Other Dependencies:  None

Supersedes:  None

Equivalent Patches:
        PHNE_4431:
        s700: 9.01 9.03 9.05
        s800: 9.00 9.04

Patch Package Size:  70 Kbytes

Installation Instructions:  
        Please review all instructions and the Hewlett-Packard
        SupportLine User Guide or your Hewlett-Packard support terms
        and conditions for precautions, scope of license,
        restrictions, and, limitation of liability and warranties,
        before installing this patch.
        ------------------------------------------------------------
        1. Back up your system before installing a patch.

        2. Copy the patch to your /tmp directory and unshar it:

                cd /tmp
                cp patch_source/PHNE_5287 .
                sh PHNE_5287

        3. Become root and run update:

                /etc/update

        4. Use the cursor keys to select "Change Source or
           Destination ->" and press [Return].

        5. Select "From Tape Device to Local System ..."
           in the Change window and

        6. Change "Source: /dev/rmt/0m" to
           "Source: /tmp/PHNE_5287.updt"

        7. Press "Done" (f4).

        8. Follow the standard directions for update.

        Update moves the original software to
        /system/PHNE_5287/orig.  Keep this file to recover from any
        potential problems.  You should move the .text file to
        /system/PHNE_5287 for future reference.

        To put this patch on a magnetic tape and update from the
        tape drive, use dd:

                dd if=PHNE_5287.updt of=/dev/rmt/0m bs=2048

Special Installation Instructions:  None