Patch Name:  PHNE_2422

Patch Description: s300_400 9.X vt3k(1) with typeahead and other fixes

        This vt3k patch adds full support for carriage control characters.

        HP typeahead support--implements MPE HPTYPEAHEAD functionality if set
        on the 3000 or if vt3k user specifies -t.

        Note that some block mode applications will not run properly
        with typeahead.

        HPTYPEAHEAD requires MPE/iX release version 3.1 or later.
        On release MPE/iX 2.2 systems, VTSERVER version
        B.00.05.04C (patch NSSBDB3) or later has the required functionality.
        On release MPE/iX 3.0 systems, VTSERVER version
        B.00.06.02A (patch NSSBDB9) or later has the required functionality.

        Sessions may hang after user types break or control-y.
        Change:  timing of break/subsys break handling.

Path Name:  /hp-ux_patches/s300_400/9.X/PHNE_2422

Effective Date:  93/04/29

Repost:  95/06/22
        The patch was modified to allow installation on HP-UX 9.10.

OS Release:  9.00 9.03 9.10

Reboot Required:  No

Patch Files:  
    vt3k

SR#:  1653040014 5000673418 4701104885

"what" string/timestamp:  
    vt3k:
        NS Services vt3k A.09.00 PHNE_2422 - S300/400 (NS NetIPC
        version) (c) Copyright 1989, 1990 Hewlett-Packard Co.  Build
        Date:  16:39 on 04/19/1993

"sum" output:  
    65441 62 vt3k

Dependencies:  None

Supersedes:  None

Patch Package Size:  90 Kbytes

Installation Instructions:  

     Please review all instructions and the Hewlett-Packard
     SupportLine User Guide or your Hewlett-Packard support terms
     and conditions for precautions, scope of license,
     restrictions, and, limitation of liability and warranties,
     before installing this patch.

     Note: Please back up your system before you patch.

---------------------------------------------------------------------------
After getting the patch onto your machine, unshar the patch (sh PHNE_2422).

To install this patch do the following:
1) Run /etc/update (Note: you must be logged in as root to update
   a system).
2) Once in the update "Main Menu" move the highlighted line to "Change
   Source or Destination ->" and press "Return" or "Select Item".
3) Make sure the highlighted item in the "Change Source or Destination"
   window is "From Tape Device to Local System ...", then press "Return" or
   "Select Item".
4) You should now be in the "From Tape Device to Local System" window.
   Change the "Source:  /dev/rmt/0m" to "Source: /tmp/PHNE_2422.updt"
   (this assumes that you are in the /tmp directory where PHNE_2422.updt
   has been placed).  Note: You must enter the complete path name.
5) Press "Done".
6) From here on follow the standard directions for update.

The customized script that update runs will move the original software
to /system/PHNE_2422/orig.  HP recommends keeping this software there in
order to recover from any potential problems.  It is also recommended that
you move the PHNE_2422.text file to /system/PHNE_2422 to be retained for
future reference.

If you wish to put this patch on a magnetic tape and update from the tape
drive, dd a copy of the patch to the tape drive.  As an example the
following will create a copy of the patch that update can read:
dd if=PHNE_2422.updt of=/dev/rmt/0m bs=2048