Attached devices:
Host: scsi3 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: WDC WD2500AAKX-7 Rev: 1H19
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi2 Channel: 00 Id: 03 Lun: 00
  Vendor: IBM      Model: DDRS-39130W      Rev: S97B
  Type:   Direct-Access                    ANSI  SCSI revision: 02

description: SCSI Disk
product: DDRS-39130W
vendor: IBM
physical id: 0.3.0
bus info: scsi@2:0.3.0
logical name: /dev/sdb
version: S97B
serial: QEJV0627
size: 8678MiB (9100MB)
capacity: 8927MiB (9361MB)
capabilities: 7200rpm
configuration: ansiversion=2 logicalsectorsize=512 sectorsize=512

[    9.966583] scsi 2:0:3:0: Direct-Access     IBM      DDRS-39130W      S97B PQ: 0 ANSI: 2
[    9.966635] scsi2:A:3:0: 
[    9.980906] scsi target2:0:3: Beginning Domain Validation
[    9.997228] scsi target2:0:3: wide asynchronous
[   10.004296] scsi target2:0:3: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[   10.010824] scsi target2:0:3: Domain Validation skipping write tests
[   10.010864] scsi target2:0:3: Ending Domain Validation
[   12.902744] sd 2:0:3:0: Attached scsi generic sg1 type 0
[   12.904091] scsi target2:0:3: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[   12.904880] sd 2:0:3:0: Power-on or device reset occurred
[   12.940349] sd 2:0:3:0: [sdb] 17773980 512-byte logical blocks: (9.10 GB/8.47 GiB)
[   12.989805] sd 2:0:3:0: [sdb] Write Protect is off
[   12.989839] sd 2:0:3:0: [sdb] Mode Sense: b9 00 00 08
[   13.022197] sd 2:0:3:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   13.296598] sd 2:0:3:0: [sdb] Attached SCSI disk
[  343.167164] sd 2:0:3:0: [sdb] tag#78 Sense Key : Recovered Error [current] 
[  343.167179] sd 2:0:3:0: [sdb] tag#78 Add. Sense: Recovered data with retries
[  345.254929] sd 2:0:3:0: [sdb] tag#85 Sense Key : Recovered Error [current] 
[  345.254933] sd 2:0:3:0: [sdb] tag#85 Add. Sense: Recovered data without ECC - data auto-reallocated